Hexagon 1.75mm Hotend (24V, compatible with MicroDelta Rework and I3 Metal Motion)
Full Metal Hotend for 1.75mm filament (24V, compatible with MicroDelta Rework and I3 Metal Motion)
Out of stock
The hotend converts the cold filament coming from the spool in an extruded plastic making the printed part.
CAUTION: This hotend comes pre-mounted, but needs to be mounted by yourself, tu avoid any plastic leak.
To do it, go on P.15 of the guide available here.
Description of the Hexagon Hotend:
Made without plastic or PTFE cold part, this hotend can easily reach 300C°.
So it's possible, with this hotend, to print a large range of materials, more than with a classic MK5 : PLA, Nylon, Polycarbonate, ABS, LayWood, PVA, HDPE and quite every filament . Its metalic conception make it more durable.
Standard provided with 1.75mm iner and 0.4mm outer diameter, the nozzle can be easily changed for different outer diameters: 0,3 mm, 0,4mm et 0,5 mm.
Features:
The kit includes:
CAUTION: This hotend comes pre-mounted, but needs to be mounted by yourself, tu avoid any plastic leak.
To do it, go on P.15 of the guide available here.
Description of the Hexagon Hotend:
Made without plastic or PTFE cold part, this hotend can easily reach 300C°.
So it's possible, with this hotend, to print a large range of materials, more than with a classic MK5 : PLA, Nylon, Polycarbonate, ABS, LayWood, PVA, HDPE and quite every filament . Its metalic conception make it more durable.
Standard provided with 1.75mm iner and 0.4mm outer diameter, the nozzle can be easily changed for different outer diameters: 0,3 mm, 0,4mm et 0,5 mm.
Features:
- Hotend: Hexagon 1.75mm
- Inner filament diameter: 1.65-1.80mm
- nozzle outer diameter provided: 0.4mm (changeable into 0.3 or 0.5mm)
- Materials: Aluminium, Inox and brass
The kit includes:
- Hexagon hotend
- Cabled thermistor
- Heater cartridge 24V
- Silicone cap
- Flat wrench 4.5mm and Allen key adapted to the Hexagon tightening
