PLA Draftplast 1.75mm Black 1kg
1kg of PLA Draftplast 1.75mm Black (RAL 9017)
Indicated wieght: actual amount of printable material.
This product benefits from a preferential rate and cannot be subject to any additional one-off or permanent reduction in its price.
Indicated wieght: actual amount of printable material.
This product benefits from a preferential rate and cannot be subject to any additional one-off or permanent reduction in its price.
Out of stock
Need some help to chose your filament? Take a look at this link "Everything about... THE FILAMENTS"
________________________
Draftplast is a PLA (Poly Lactic Acid) filament that stands out from the others by its agressive price, but without neglecting quality.
To garrantee it, it's made from virgin Ingeo Natureworks pellets, with requirements of diameter control and regularity disproportionate in compare with other filaments in this range of price.
You might appreciate an proper and tidy winding which is a truly satisfying experience, that will garantee unhindered printings.
It is provided in a vacuum packaging with a dehumidifier packet.
Our printing recommendations:
| Extrusion temperature | 190 - 120°C |
| Heatbed temperature | 0 - 60°C |
| Printing speed | 3600 - 6000mm/min |
| Withdrawal distance | 0,4 - 0,6mm |
| Withdrawal speed | 300 - 500mm/min |
| Extrusion coeff. | 0,98 |
Technical features:
| Density at 20°C | 1,24g/cm³ (ISO1183) |
| Melting point | 145 - 160°C (ISO11357) |
| Glass transition | 55 - 60°C (ISO11357) |
